ALL SATA Internal And External Cables on one Page

SATA Cables for SATA connections
More sata extension cable and sata power cable and sata multilane cable available at satacables.com

3ft. External SATA cable that with SATA II (eSATA) type receptacles for SATA II external hard drive enclosures. Achieve 1.5 GB/s or 3.0 GB/s data transfer rate opposed to the 400 MB/s using other types of connections!

SATA II External Cable eSATA 3ft Cable

SATA II External Cable for SATA II external hard drive enclosures.

The SATA2-3FT1B SATA II cable is meant for use with external SATA II hard drive enclosures serving up 1.5 GB/s and up to 3 GB/s. This SATA cable in conjunction with a SATA II enclosure provides the means to achieve a high data transfer rates that can not be achieved with USB or Firewire technology.

ONE Meter (3ft) eSATA External Cable
Super Sale on eSATA to eSATA Cable 3ft. Long Type "I" to "I"
  • 1 unit $6.89
  • 3 or more units $5.89
  • 12 or more units $4.89

QTY:     


TWO Meter (6ft) eSATA External Cable
Super Sale on eSATA to eSATA Cable 6ft. Long Type "I" to "I"
  • 1 unit $9.89
  • 3 or more units $8.89
  • 12 or more units $7.89

QTY:     


Item # SATA2-3FT1B
Price: $19.89
Ship Weight: 1 lb.
Color: Black
Size: 3 FT. L
In Stock: Yes
Compatibility: SATA II
Quantity Buy: Yes

Features:
  • Achieve 1.5 GB/s and up to 3 GB/s data transfer
  • Connects directly to SATA II enabled hard drive enclosures
  • Compact: Easily stores when not in use
  • Can only be used with a SATA II hard drive enclosures
  • Flexible for easy positioning

3ft. SATA II Shielded External Cable connector

Serial ATA II connector
SATA II Shielded External Cable internal pins

SATA II Shielded External Cable internal pins
Specifications:
    Materials & Electrical Characteristic

  • Conductor: 26AWG tinned stranded copper, NO CHEAP JUNK BY OKGear!
  • Isolator: HDPE or FOAM PE or FOAM PP
  • Shielding: Self-Cling Aluminum Mylar Tape
  • Braid: 85% Coverage Min 16/8/0.1 tinned copper
  • Jacket: 80C PVC OD 3.7mm*9.4mm+/-0.2


    • Connector:

  • Housing: Temperature polyester & Glass fiber, UL 94V-0
  • Terminal: Copper alloy
  • Plating: gold plated over nickel

    • High Frequency Character:
  • Impedance: 100+/-15 ohms (Mated connector)
  • Attenuation: 6 dB Max from 10MHz ~ 4500MHz
  • Crosstalk (NEXT): -26dB Max from 10MHz ~ 4500MHz
  • Intra pair skew: 10 pcs Max
  • Rise Time: 85 ps Max

Serial ATA - USB 2.0 - 1394 chart comparison
Looking at the above comparison chart, the most noticeable difference over USB 2.0 and 1394 is Serial ATA Burst transfer rate. Burst transfer rates occur when data is read directly from the buffer memory on the disk drive, so the normal mechanical limitation of reading data off the platters is not present. In this case, the burst transfer rates from Serial ATA are nearly three times higher than that of USB or 1394 giving a much faster read/write capability.

The above chart information can be found at http://www.sata-io.org

SATA II Cable Detailed Connection Information

SATA II cable positioning To the left are 2 images of the SATA II cable at different stages of cable connection to the SATA II enclosure. In positioning the SATA II male cable to its SATA II female port, there is a cable guide on either side of the male connector to guide the connector smoothly into place. These cable or connector guides must be in the top position to slide into the female port. If for some reason the cable does not slide easily into the female SATA II port, check the cable for proper alignment to the port with the guides in the top position. For a better view of the cable connector guides, click the top image on the left or follow this link for a larger image.

When proper alignment of the cable is realized, the cable should slide into the female port with the cable jacket being flush against the enclosure outer plate.
SATA II cable connected

Product Testimonial

In working with the SATA II external cable I found that the cable connection to its SATA II enclosure was simple once the cable was positioned properly for connection. By using the connection guides on the connector, I very easily slipped the connector into the port giving me a solid connection. The cable is flexible enough to position your external SATA II enclosure where you need to within 3 feet of you PC.

Bob Boisvert...Web Professional
SATA I and SATA II cable and port differences
SATA I female cable port connector SATA I male port connector SATA II female connector of cable SATA II male port connector
SATA I female cable connector - View a larger image. SATA I male port connector - View a larger image. SATA II female cable connector - View a larger image. SATA II male port connector - View a larger image.

eSATA External Sata Shielded Cables

External Dual SATA II (eSATA) Port PCI Bracket Cable 5inch 10inch and 15inch versions available. Connect an external eSATA II 3Gbps Serial ATA hard drive through a standard expansion slot.

External eSATA II Serial ATA Dual Port PCI Bracket

This KB-116-2 Internal to External SATA PCI bracket will fit in any standard expansion slot. It basically allow you to connect an external SATA hard drive to your computer. The external port connects to the disk enclosure, and the internal SATA port can be attached to any SATA controller or SATA ready motherboard installed on your PC.

5-Inch Dual eSATA Type "I" Ports PCI Bracket
  • 1 unit $15.98
  • 3 or more units $12.98
  • 12 or more units $11.98

QTY:     


10-Inch Dual eSATA Type "I" Ports PCI Bracket
  • 1 unit $17.98
  • 3 or more units $14.98
  • 12 or more units $13.98

QTY:     


15-Inch Dual eSATA Type "I" Ports PCI Bracket
  • 1 unit $18.98
  • 3 or more units $16.98
  • 12 or more units $14.98

QTY:     


Item # KB-116-5e
Price: $15.98
Ship Weight: 1 lb.
Color: Red
Size: 5 inch Long Cables
In Stock: Yes
Compatibility: SATA I /SATA II
Quantity Buy: Yes

Great for any SATA II Compatible Mobo including :Asus A8N-SLI Premium
Abit *.* Intel *.* Etc.>

External Dual SATA I Port PCI Bracket Cable 25cm. Connect an external Serial ATA hard drive through a standard expansion slot. Converts your Internal SATA 1 port to external connection at the PCI bracket

External Serial ATA Dual Port PCI Bracket

This KB-116-5e Internal to External eSATA PCI bracket will fit in any standard expansion slot. It basically allow you to connect an external SATA hard drive to your computer. The external port connects to the disk enclosure, and the internal SATA port can be attached to any SATA controller or SATA ready motherboard installed on your PC.

Buy with 100% Satisfaction!
  • 1 unit $8.98
  • 3 or more units $7.98
  • 12 or more units $6.98

QTY:     


Item # KB-116-2
Price: $8.98
Ship Weight: 1 lb.
Color: Red
Size: 0.25 m (9.750 inches) Long
In Stock: Yes
Compatibility: SATA I
Quantity Buy: Yes

SATA PCI Bracket Features:
  • Provides 2 external SATA I connection to SATA device.
  • 0.25m in length (9.750 inches)
  • Supports 1.5 GBps Data Transfer Rate.
  • Convert Internal SATA 1 port to External connection at PCI bracket
  • Supports (2) Serial ATA device
External device to the SATA PCI duel port bracket

 Specifications:
    System:

    For Host Systems with 2 internal SATA Ports.

    Serial ATA Ports:

  • Compatible with SATA ports on mother boards or add in cards.
  • Compliant with Serial ATA 1.0 Specifications

    • Cable Support:

  • Supports (2) external SATA Device

NOTE: OS Transparent, depends on the Host Support.

USB 2.0, 1394, and Serial ATA comparison chart
Looking at the above comparison chart, the most noticeable difference over USB 2.0 and 1394 is Serial ATA Burst transfer rate. The results of eSATA are dramatic and with no protocol overhead issues as with USB or 1394. The eSATA storage bus delivers as much as 37 times more performance. This ability is perfect for using an array of drives with performance striping behind the eSATA (external SATA) host port.

The above chart and information can be found at http://www.sata-io.org

SATA I Dual Port PCI Bracket Connection Information

The Serial ATA dual port PCI Bracket installs into your PC as you would install any other PCI related card or bracket. However, the cable end of the PCI bracket needs to connect to either the SATA enabled mother board or SATA controller card within your PC.

Because this is a dual port SATA PCI bracket, two available internal SATA I port connections must be available to enable both ports on the bracket. Both ports however are independant of each other meaning if there is only one available SATA internal connector to connect to, then only one of the SATA PCI bracket ports would function.

For an example of a PCI SATA I controller card, go here. This allows an external SATA device connection to be made from an internal source (the PCI controller card) by connecting the cable end of the single port SATA I PCI bracket to the controller cards internal female connection.

Tech Notes:

Because of the standard design in the SATA I Dual Port PCI Bracket connectors, proper alignment and connection are guaranteed and can not be connected in any other position. If forced, damage may occur to both the internal SATA port and the SATA PCI Bracket. Single port SATA I PCI brackets are also available.
Serial ATA Cable Connection Tips:
If you are unfamiliar with SATA cable connections, follow these tips to ensure a proper connection.
  • Always follow ESD recommendations when working with electro static sensitive devices.
  • Make sure there at no obstructions inside of the port connections such as any packing materials the cable or PC may have come with.
  • Make sure you are trying to connect the correct type of SATA cable to both your device and PC. Looking at your connectors ports, you should have a male and female of the same type connector.
  • Make sure the cable, once connected, is seated properly into the female port by checking for any play that may be presenting itself, in most case a little play is acceptable but if excessive, the port connections should be checked.
  • Always check for guide placement before trying to make the connection between PC and device to avoid damage.
  • When installing the SATA I Dual Port PCI Bracket or other device into the PC, always make sure the power is off, the best way to ensure this is to disconnect the power cable from your computer.

External Single SATA I Port PCI Bracket Cable 25cm. Connect an external Serial ATA hard drive through a standard expansion slot. Converts your Internal SATA 1 port to external connection at the PCI bracket

External Serial ATA Single Port PCI Bracket

The KB-116 SATA PCI bracket will fit in any standard size expansion slot. It basically allows you to connect an external SATA hard drive to your computer. The external port connects to the disk enclosure, and the internal SATA port can be attached to any SATA controller card or SATA ready motherboard installed on your PC.




Buy with 100% Satisfaction!
  • 1 unit $5.98
  • 3 or more units $4.98
  • 12 or more units $3.98

QTY:     


Item # KB-116
Price: $5.98
Ship Weight: 1 lb.
Color: Red
Size: 0.25 m (9.750 inches) Long
In Stock: Yes
Compatibility: SATA I
Quantity Buy: Yes

SATA PCI Bracket Features:
  • Provides 1 external SATA I connection to SATA device.
  • 0.25m in length (9.750 inches)
  • Supports 1.5 GBps Data Transfer Rate.
  • Convert Internal SATA 1 port to External connection at PCI bracket
  • Supports (1) Serial ATA device
SATA I PCI Bracket Cable to PCI Card Controller

 Specifications:
    System:

    For Host Systems with internal SATA Ports.

    Serial ATA Ports:

  • Compatible with SATA ports on mother boards or add in cards.
  • Compliant with Serial ATA 1.0 Specifications

    • Cable Support:

  • Supports (1) external SATA Device

NOTE: OS Transparent, depends on the Host Support.

USB 2.0, 1394, and Serial ATA comparison chart
Looking at the above comparison chart, the most noticeable difference over USB 2.0 and 1394 is Serial ATA Burst transfer rate. The results of eSATA are dramatic and with no protocol overhead issues as with USB or 1394. The eSATA storage bus delivers as much as 37 times more performance. This ability is perfect for using an array of drives with performance striping behind the eSATA (external SATA) host port.

The above chart and information can be found at http://www.sata-io.org

SATA I Single Port PCI Bracket Connection Information

The Serial ATA single port PCI Bracket installs into your PC as you would install any other PCI related card or bracket. However, the cable end of the PCI bracket needs to connect to either the SATA enabled mother board or SATA controller card within your PC.

For an example of a PCI SATA I controller card, go here. This allows an external SATA device connection to be made from an internal source (the PCI controller card) by connecting the cable end of the single port SATA I PCI bracket to the controller cards internal female connection.

As an example of a connection to a PCI Controller Card, the image to the left shows the cable end of the PCI external SATA I bracket to the internal female port of the controller card. The SATA I controller card was purposely taken out to show how the connection between the two are established.

Tech Notes:

A standard design of the SATA connectors allows for proper alignment and connection, connections are guaranteed not be connected in any other position. If forced, damage may occur to both the internal SATA port and the SATA PCI Bracket. Dual port SATA I PCI brackets are also available.
Serial ATA Cable Connection Tips:
If you are unfamiliar with SATA cable connections, follow these tips to ensure a proper connection.
  • Always follow ESD recommendations when working with electro static sensitive devices.
  • Make sure there at no obstructions inside of the port connections such as any packing materials the cable or PC may have come with.
  • Make sure you are trying to connect the correct type of SATA cable to both your device and PC. Looking at your connectors ports, you should have a male and female of the same type connector.
  • Make sure the cable, once connected, is seated properly into the female port by checking for any play that may be presenting itself, in most case a little play is acceptable but if excessive, the port connections should be checked.
  • Always check for guide placement before trying to make the connection between PC and device to avoid damage.
  • When installing the SATA I Single Port PCI Bracket or other device into the PC, always make sure the power is off, the best way to ensure this is to disconnect the power cable from your computer.

Build a bridge for a superior data highway connection to your external SATA II storage system. This high speed 4-lane SATA II cable is meant to build the connection between your bridge board and cable immediately!

Serial ATA (SATA) II 6 foot Multilane Cable

6 foot Serial ATA II "Multilane" Cable for Serial ATA Drives. 39-ML-4xi SATA 4 connectors in 1 Superior reliability, easy to install cable. Meets SATA II requirements With its high-speed multi-lane (x4) connector, it delivers up to 3G/s SATA2 data rate with its reliable signal quality.

6 foot Serial ATA II Multilane Cable Serial ATA Cable for SATA Drives 39-ML-4xi

Buy in Discount Quantities!
  • 1 unit $59.89
  • 3 or more units $56.89
  • 12 or more units $52.89

QTY:     


Item # SATA-ML-3GB4X6
Price: $59.89
Ship Weight: 2 lb.
Color: Black
Size: 6 FT. L
In Stock: Yes
Compatibility: SATA II
Quantity Buy: Yes

Features:
  • Provides four 7-pin Serial ATA2 Connectors.
  • One 4-Channel External Multi-Lane (x4) Connectors.
  • Idea to Convert Internal 4 Ports to External 4 Ports.
  • Supports up to 3Gb/s SATA2 Data Transfer Rate.
  • Supports Host (PC or Server) Side External Converting.
  • Multilane PCI Brackets Available upon Request.
  • Idea for External JBOD and RAID Connections.

4-channel SATA PCI Bracket Backplane
View a larger image

4-channel SATA PCI Bracket Back plane with ATA2 port

Features and Specs available through our sister site

Specifications:
    System:

    For Host Systems with internal SATA Ports.

    Serial ATA Ports:

  • Compatible with SATA ports on mother boards or add in cards.
  • Compliant with Serial ATA 2.0 Specifications
  • Supports 4 Serial ATA devices with up to 3.0Gb/s Data Rate
  • Cable Length up to 1 meter
  • Supports JBOD or RAID Connections.


    • I/O Hardware:

  • 4 internal 7-pin Serial ATA II connectors
  • 1 4-channel external Serial ATA II connector

    • Cable Support:

  • Supports Infinite Band x4 (by four) Cable

NOTE: OS Transparent, depends on the Host Support.

SATA Multilane cable diagram
The diagram above shows how the SATA-ML-3GB4X6 multilane 4 channel cable works in conjunction with a PC and multi bay enclosure.

Explanation, The Multi Bay Enclosure:

Both the enclosure and the PC must have the 4-channel multilane back plane device with ATA2 ports, this is where the 4-channel multilane cable will be connected between the two devices. The enclosure hard drives each have their own channel that will connect to the multilane back plane internal ports via an internal SATA cable. All drive channels to the back plane device converge into 1 output cable containing the information for each channel (4 channel max.) to the PC.

Explanation, The PC:

The PC operates similarly to the multi bay enclosure in that it also will contain a multilane back plane device to output the information to the hard drive on any of the 4 channels available. The channels from inside the PC can connect from either a SATA II PCI controller card or the mother board SATA ports if available,

SATA II Cable Detailed Connection Information

SATA multilane cable to SATA 4 channel back plane
View larger image		 The two images to the left are representations of how the SATA-ML-3GB4X6 Multilane SATA cable connects to the PC and Multi bay enclosure. The SATA-ML-3GB4X6 connects at both the PC and the Enclosure to create a single cable pathway to 4 SATA devices within one enclosure unit.

The top image shows a PCI bracket style connection that would be installed in a PC to control output to the storage device.

The bottom image is the SATA II multilane mounting bracket that would be installed into the multi bay hard drive enclosure.

Both these SATA II back plane multilane items are available through our sister site by following the links above.


SATA multilane cable to SATA 4 channel back plane
View larger image

Tech Notes:

The 4-channel multilane cable does not have to be used with all 4 channels or 4 hard drives. The multilane cable can be used with 2 drives without loss of information in any way. The channels represented in the multilane cable and back plane are independent of each other, one does not affect the other in any way.

The PC connections can be either on a SATA PCI controller card with internal ports or your PC's mother board SATA ports.

Additional images SATA II Multilane Cable
SATA II multilane connector end Connection to multilane back plane Multilane PCI  
SATA II multilane cable connector, View a larger image. Multilane connection, View a larger image multilane PCI bracket, View a larger image  

Available SATA II Multilane Cable lengths

3 foot Serial ATA II Multilane Cable Serial ATA Cable for SATA Drives 39-ML-4xi
  • 1 unit $49.89
  • 3 or more units $46.89
  • 12 or more units $42.89

QTY:     

10 foot Serial ATA II Multilane Cable Serial ATA Cable for SATA Drives 39-ML-4xi
  • 1 unit $79.89
  • 3 or more units $76.89
  • 12 or more units $72.89

QTY:     


External Straight to Left Serial ATA signal cable for use with Serial ATA controller to a SATA device. Make your connection easily to your external Serial ATA device from your PC in various lengths.

Serial ATA Straight to Left Signal Cable Overview

The SS-01MLS .1m Serial ATA straight to right Signal Cable provides SATA signal and data transfer speeds of 1.5 GBps to an external Serial ATA device via a SATA controller installed on your PC. See images below

SATA straight to left signal cables are available in various lengths, see below for more information. **NOTE: All cable lengths are measured between the connectors not end to end.
  • Length: 0.1 m (4.5 inches) $1.58 ea. #SS-01MLS

QTY:     

  • Length: 0.2 m (8.5 inches) $1.60 ea. #SS-02MLS

QTY:     

  • Length: 0.5 m (19.5 inches) $1.64 ea. #SS-05MLS

QTY:     

  • Length: 0.75 m (29.5 inches) $1.67 ea. #SS-075MLS

QTY:     

  • Length: 1.0 m (39 inches) $1.70 ea. #SS-1MLS

QTY:     


Ship Weight: 1 lb.
Color: Red
Size: Various from .1m to 1M
In Stock: Yes
Compatibility: SATA I
Quantity Buy: Yes



SATA Straight to Left cable
SATA Signal Cable Features:
  • Provides 1 external SATA I connection Straight to Right angle connection SATA device.
  • 0.1 m in length
  • Supports 1.5 GBps Data Transfer Rate.
  • Allows for a right angle connection to device

Drive connection with various SATA cables
View a larger image

 

Specifications:
    System:

    For Host Systems with internal SATA Ports.

    Serial ATA Ports:

  • Compatible with SATA ports on mother boards or add in cards and brackets.
  • Compliant with Serial ATA 1.0 Specifications

    • Cable Support:

  • Supports (1) external SATA Device

NOTE: OS Transparent, depends on the Host Support.

USB 2.0, 1394, and Serial ATA comparison chart
Looking at the above comparison chart, the most noticeable difference over USB 2.0 and 1394 is Serial ATA Burst transfer rate. The results of eSATA are dramatic and with no protocol overhead issues as with USB or 1394. The eSATA storage bus delivers as much as 37 times more performance. This ability is perfect for using an array of drives with performance striping behind the eSATA (external SATA) host port.

The above chart and information can be found at http://www.sata-io.org

SATA Signal Cable Detailed Connection Information

The image on the left shows the external Straight to Left in one of its various sizes. The signal cable connects to the device at the right angle end of the cable. The straight end of the cable is connected to the PC using an available SATA I port.


Click this link for a larger view of the image on the left. For additional information for connecting your serial ATA cable to your PC, see SATA PCI Bracket information, visit our SATA family of web sites at www.satagear.com

Tech Notes:

Because of the design in the SATA I Signal Cable connectors, proper alignment and connection are guaranteed and can not be connected in any other position. If forced, damage may occur to both the PC SATA port and the SATA signal cable. Looking at the connector, the notches are opposite each other left for left and right for right, the connector guides are also opposite each other left for left and right for right. See a diagram of the notch position.
Serial ATA Cable Connection Tips:
If you are unfamiliar with SATA cable connections, follow these tips to ensure a proper connection.
  • Always follow ESD recommendations when working with electro static sensitive devices.
  • Make sure there at no obstructions inside of the port connections such as any packing materials the cable or PC may have come with.
  • Make sure you are trying to connect the correct type of SATA cable to both your device and PC. Looking at your connectors ports, you should have a male and female of the same type connector.
  • Make sure the cable, once connected, is seated properly into the female port by checking for any play that may be presenting itself, in most case a little play is acceptable but if excessive, the port connections should be checked.
  • Always check for guide placement before trying to make the connection between PC and device to avoid damage.



External Straight to Right Serial ATA signal cable for use with Serial ATA controller to a SATA device. Make your connection easily to your external Serial ATA device from your PC.

Serial ATA Straight to Right Signal Cable Overview

The SS-01MSR .1m Serial ATA straight to right Signal Cable provides SATA signal and data transfer speeds of 1.5 GBps to an external Serial ATA device via a SATA controller installed on your PC. See images below

SATA straight to right signal cables are available in various lengths, see below for more information. **NOTE: All cable lengths are measured between the connectors not end to end.
  • Length: 0.1 m (4.5 inches) $1.58 ea. #SS-01MSR

QTY:     

  • Length: 0.2 m (8.5 inches) $1.60 ea. #SS-02MSR

QTY:     

  • Length: 0.5 m (19.5 inches) $1.64 ea. #SS-05MSR

QTY:     

  • Length: 0.75 m (29.5 inches) $1.67 ea. #SS-075MSR

QTY:     

  • Length: 1.0 m (39 inches) $1.70 ea. #SS-1MSR

QTY:     


Ship Weight: 1 lb.
Color: Red
Size: Various from .1m to 1M
In Stock: Yes
Compatibility: SATA I
Quantity Buy: Yes



SATA Signal Cable Features:
  • Provides 1 external SATA I connection Straight to Right angle connection SATA device.
  • 0.1 m in length
  • Supports 1.5 GBps Data Transfer Rate.
  • Allows for a right angle connection to device

Serial ATA straight, right, and left angle cables
View a larger image

 

Specifications:
    System:

    For Host Systems with internal SATA Ports.

    Serial ATA Ports:

  • Compatible with SATA ports on mother boards or add in cards and brackets.
  • Compliant with Serial ATA 1.0 Specifications

    • Cable Support:

  • Supports (1) external SATA Device

NOTE: OS Transparent, depends on the Host Support.

USB 2.0, 1394, and Serial ATA comparison chart
Looking at the above comparison chart, the most noticeable difference over USB 2.0 and 1394 is Serial ATA Burst transfer rate. The results of eSATA are dramatic and with no protocol overhead issues as with USB or 1394. The eSATA storage bus delivers as much as 37 times more performance. This ability is perfect for using an array of drives with performance striping behind the eSATA (external SATA) host port.

The above chart and information can be found at http://www.sata-io.org

SATA Signal Cable Detailed Connection Information

The image on the left shows the external Straight to Right in one of its various sizes. The signal cable connects to the device at the right angle end of the cable. The straight end of the cable is connected to the PC using an available SATA I port.


Click this link for a larger view of the image on the left. For additional information for connecting your serial ATA cable to your PC, see SATA PCI Bracket information, visit our SATA family of web sites at www.satagear.com

Tech Notes:

SATA notch diagramBecause of the design in the SATA I Signal Cable connectors, proper alignment and connection are guaranteed and can not be connected in any other position. If forced, damage may occur to both the PC SATA port and the SATA signal cable. We carry left and right angle connectors, the difference between the two is where the notch in the connector is located and the connector guide. Looking at the connector, the notches are opposite each other left for left and right for right, the connector guides are also opposite each other left for left and right for right. See the simple diagram of the notch position.
Serial ATA Cable Connection Tips:
If you are unfamiliar with SATA cable connections, follow these tips to ensure a proper connection.
  • Always follow ESD recommendations when working with electro static sensitive devices.
  • Make sure there at no obstructions inside of the port connections such as any packing materials the cable or PC may have come with.
  • Make sure you are trying to connect the correct type of SATA cable to both your device and PC. Looking at your connectors ports, you should have a male and female of the same type connector.
  • Make sure the cable, once connected, is seated properly into the female port by checking for any play that may be presenting itself, in most case a little play is acceptable but if excessive, the port connections should be checked.
  • Always check for guide placement before trying to make the connection between PC and device to avoid damage.



External 0.1m Serial ATA signal cable for use with Serial ATA controller to a SATA device. Make your connection easily to your external Serial ATA device from your PC.

Serial ATA Signal Cable Overview

The SS-01MSS .1m Serial ATA Signal Cable provides SATA signal and data transfer speeds of 1.5 GBps to an external Serial ATA device via a SATA controller installed on your PC. See images below

SATA straight to straight signal cables are available in various lengths, see below for more information. **NOTE: All cable lengths are measured between the connectors not end to end.
  • Length: 0.1 m (4.5 inches) $1.58 ea. #SS-01MSS

QTY: