eSATA-150 RAID External 2Ports eSATA Type I

Be the first to review this product

Availability: In stock

Regular Price: $59.98

Special Price $25.98


Quick Overview

eSATA-150 RAID External 2Ports eSATA Type I

eSATA-150 RAID External 2Ports eSATA Type I

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

Product Description

2 External SATA (eSATA) Raid 0 & Raid 1 This PCI Host Adapter can upgrade your desktop computer to have two Serial ATA Channels.

The board provides a 32bit, 33/66 MHz PCI interface on the host side and dual, fully compliant Serial ATA ports on the device side to access Serial ATA mobile external storage devices such as hard disk drive, ZIP drive, CD-ROM, CD-RW, DVD-ROM. RAID 0 (Striping), RAID 1 (Mirroring) can improve the data performance or provide the data redundancy and rebuilding.

Dual eSATA Type "I" Port PCI Card for Windows

Two shielded and durable eSATA connectors 48 bits LBA can Break Capacity-Limit to Support HDD larger than 137GB Sufficient power current 1.5A5V and 2A12V to supply External Device Hot-plug capability

Two high speed Native Serial ATA interface ports, each supporting 1st generation Serial ATA data rates 1.5Gb/s

Fully compliant with Serial ATA 1.5G specifications Provides RAID 0 (Stripping) to greatly increase the performance of data transfer by simultaneously writing data to 2 drives Provides RAID 1 (Mirroring) to protect the data from a disk failure by writing identical data on 2 drives Two Pin header on board for LED connection Supports Spread Spectrum in receiver Independent 256-byte FIFOs (32 bit * 64 deep) per Serial ATA channel for host reads and writes Compliant with PCI Specification, revision 2.3 Integrated PCI DMA engines 32 bit, 33/66MHz fully compliant PCI host interface Mini DIN Power Connector on board to provide 12V and 5V DC power output for External Mobile Devices.

Complete with drivers for Windows 98, Windows Millennium, Windows NT 4.0, Windows 2000 and XP  ***Windows 7 Support Please obtain drivers directly from Siliconimage Chipset MFG website.


Chipset: SiI3512 - PCI to 2 Port SATA150 - SATALink 2-Port PCI Host Controller

The SiI3512 is a single-chip PCI to 2-port Serial ATA host controller. The chip fits in a smaller package (128 pin TQFP, 14x14mm) and to comply to the PCI 2.3 specification.

Additional Information

  • Serial ATA - 1.5 Gbps (150 MB/s)
  • Compliant with Serial ATA 1.0 specification
  • Integrated Serial ATA Transport, Link logic and PHY layer
  • Supports 48-bit sector address feature set
  • Two independent bus master DMA channels with 256B FIFO per channel
  • Supports Virtual DMA in PCI with serial link in legacy PIO mode
  • Supports command buffering for ATA TF shadow registers
  • Supports up to 4 MB external Flash or EPROM for BIOS expansion
  • Supports ATAPI devices such as CD-ROM, CD-RW, DVD-ROM, DVD+R, etc.
  • Hot-Plug capable
  • Selectable drive strength for backplane applications
  • LED support for each channel
  • Supports spread spectrum clocking to reduce EMI

Additional Information

SKU CG-119e
Manufacturer No
Color No
Card Interface PCI
External Ports 2 x eSATA