Native SATA Drive to IDE 40-pin Adapter for Most Enclosures

Be the first to review this product

Availability: In stock

$27.89
OR

Quick Overview

The IDE-SATA04 is a Native SATA Hard Drive to IDE 40-pin Adapter for most enclosures. SATA to IDE converter converts SATA Drives to IDE with UDMA-133/100 interfaces. Has JMicron JM20330 chip-set and supports 3.5″ IDE hard drives and 5.25″ optical drives.

40 pin SATA connection

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

  • 40 pin SATA connection

Product Description

The SATA Hard Drive Adapter is a Native SATA Drive to IDE 40-pin Adapter for most enclosures needing a SATA to IDE Converter. The SATA Hard Drive Adapter converts a SATA Drive to IDE, a perfect solution for converting SATA or SATA II devices to IDE ATA 40-Pin UDMA-133/100 interfaces.

JMicron JM20330 chip-set and supports 3.5″ IDE hard drives and 5.25″ optical drives. It’s compliant with IDE specification and supports up to UDMA/133 drives!

SATA Hard Drive Adapter to IDE ATA-100/133 40 Pin Cable image

Chip Overview:

JM20330 is a single chip solution for serial and parallel ATA translation. It includes the Serial ATA PHY, Link, Transport, and Parallel ATA (application layer) controller. The Serial ATA physical, link, and transport layers are compliant to Serial ATA 1.0 JM20330 supports a 1.5GHz data rate, and scalable to 3.0 GHz data rate by directly doubling the internal clock source.

The application layer supports both the ATA register command set and PACKET command set, which could drive both Hard Disk Drive and ATAPI Optical Storage such as CR-ROM, CD-RW, DVD-ROM, DVD-RW, etc. The Serial ATA and the Parallel ATA application layer support both host and device operation and can be configured through a single pin.

Additional Features:

  • This Adapter tested to work with Western Digital, Seagate, Hitachi, Maxtor, Toshiba, Fujitsu and Samsung Drives ranging in Capacity from 80GB up to 2,500GB (2.5TB).
  • Serial ATA 1.0 Specification compliant
  • Automatic Serial ATA 3.0/1.5 Gbps speed negotiation
  • ATA/ATAPI PIO mode 0 to 4
  • ATA/ATAPI Ultra DMA of transfer rate 16.7, 25, 33, 48, 66, 100, 133, and 150MB/s.
  • ATA/ATAPI LBA48 addressing mode associated with 2-byte sector count
  • Support Serial ATA hot-plug
  • Ultra low power consumption
  • Work for both AC and DC couple between the transmitter and the receiver
  • Provide specified OOB signal detection and transmission
  • Support Spread Spectrum Clocking to reduce EMI
  • Support 20MHz, 25MHz, 30MHz or 40MHz Reference Clock
  • Support Partial/Slumber power management
  • Provide adjustable TX signal amplitude and pre-emphasis level
  • Master IDE Device support
OS Support:
  • Windows 98, Me, XP, 2000, 2003, CE, Vista, Windows 7, and Windows 8
  • Linux and Mac OS 10.X

Additional Information

SKU IDE-SATA04
Manufacturer No
Color Green