4pin MOLEX to 15pin SATA power adapter with Activity PINOUT.

Be the first to review this product

Availability: Out of stock

$3.99

Quick Overview

4pin MOLEX to 15pin SATA power adapter with pin 11 and 5VDC power output.

4pin MOLEX to 15pin SATA power adapter with Activity PINOUT

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

  • 4pin MOLEX to 15pin SATA power adapter with Activity PINOUT
  • Molex to 15 pin SATA Power Adaptyer

Product Description

This is a 4pin MOLEX to 15pin SATA power adapter with PIN11 and 5VDC output. On the pin11 output connector the red wire is a continuous 5V output and the black wire is connected to PIN11 of the SATA connector. MOST hard drives short PIN11 to ground during activity, thus allowing current to flow and illuminating an LED. Please verify your drives' functionality before utilizing this cable. We are not aware of any specific model drives that do not work in this manor, however this behavior is not required by SATA specification, and some drives may in fact not support activity on PIN11 at all.

Separate 5VDC connector is only live when a drive is connected, useful to be used as a "drive connected" status like for hot-swap setups.

4 Pin Molex to 15 Pin SATA Power Adapter

This is a spare cable used to provide the LED status lights on our Quick Swap SATA Racks. Their functionality on other devices is not guaranteed. This cable is sold because of popular demand for a cable of its type, however supply is extremely limited. Once we run out, we will never be getting more.

ALL OUTPUTS ARE BELIEVED TO BE 5VDC AT ALL TIMES. YOU WILL NEED TO USE A CORRECT RESISTOR FOR YOUR LEDS.

This product is warrantied against defects for 90 days. NO WARRENTY OR RESPONSIBLILTY IS PROVIDED FOR THE PRODUCTS THIS CABLE IS CONNECTED TO. USE AT YOUR OWN RISK

Additional Information

SKU SATA15P-ACT-2P
Manufacturer CoolGear